• 3.0 mm precision nut driver by Wiha; fits Pocher hex nuts and bolts 
• 
•  Precision Phillips screwdriver by Wiha
  
• Two sizes of precision slotted screwdrivers by Wiha
• Nut holder by Grobet (Switzerland) grips small hex nuts for insertion or removal; spring loaded, swivel top.
• Straight and bent nose tweezers to handle small nuts, bolts, screws, wire spokes, etc
  
• Genuine Xuron #170-II Micro-Shear� Flush Cutter for small plastic parts, soft wire up to 18 AWG (1mm) and photo-etched parts (USA)
  
  
• Xuron #2175 Maxi-Shear  Flush Cutter rated for cutting soft wire up to 12 AWG (2mm) and the perfect cutter for large Pocher sprues. (USA)
   
• Aluminum mini-drill/pin vise with 12 bits sized 52 to 75 (.064-.021) stored in the threaded magnetic cap. Drill or enlarge holes in plastic without melting, and keep those Pocher screws from breaking! (USA)
  
  
• Curved and straight hemostats - use like very fine vise-grip pliers to hold nuts, bolts, screws, wire spokes, etc. Being able to grip a "blind" nut or part will save you hours of disassembly; they also work well holding small parts when painting.
  
• Wiha tool magnetizer/demagnetizer; use to keep those tiny screws attached to your screwdriver. Draw any small tool several times through the appropriate slot.
  
• zippered canvas tool pouch
  

• Two sizes of precision Phillips screwdrivers by Wiha
  
• 
• Two sizes of precision slotted screwdrivers by Wiha
• 
• 2 mm tap* to thread metal holes in the Pocher Ducati kit for screws B & S.
•  
• 2.3 mm tap* to thread metal holes in the Pocher Ducati kit for screws A, E, P & W, and in the Aventador & Huracan kit for screws C, O, Q & R.
• 
• 2.5 mm tap* to thread metal holes in the Pocher Lamborghini Aventador & Huracan kits for screws B, E, F, L, M, & S.
• Tap handle
• 
  

* note: tapping the holes in metal parts is not required, but makes assembly much easier and helps prevent stripped or broken screw heads. Page 3 of the Lamorghini and Ducati assembly manuals contains a helpful list of all screw sizes.

• Straight and bent nose tweezers to handle small nuts, bolts, screws, wire spokes, etc
• 

• Genuine Xuron #170-II Micro-Shear� Flush Cutter for small plastic parts, soft wire up to 18 AWG (1mm) and photo-etched parts (USA)
  
  
• Xuron #2175 Maxi-Shear  Flush Cutter rated for cutting soft wire up to 12 AWG (2mm) and the perfect cutter for large Pocher sprues. (USA)
   
• Aluminum mini-drill/pin vise with 12 bits sized 52 to 75 (.064-.021) stored in the threaded magnetic cap. Drill or enlarge holes in plastic without melting, and keep those Pocher screws from breaking! (USA)
  
  
• Curved and straight hemostats - use like very fine vise-grip pliers to hold nuts, bolts, screws, wire spokes, etc. Being able to grip a "blind" nut or part will save you hours of disassembly; they also work well holding small parts when painting.
  
• Wiha tool magnetizer/demagnetizer; use to keep those tiny screws attached to your screwdriver. Draw any small tool several times through the appropriate slot.
  
• zippered canvas tool pouch